At Yanpeng, we’re committed to the success of your double S nonwoven fabric machine. One area that does require maintenance is the rollers. Rollers are crucial to fabric-making, and if they become dusty, it can cause issues, or even damage the machine.

To perform a roller cleaning on your machine, simply do the following:

First, make sure the machine is turned off and unplugged for safety.

EASIER POINT: Use a soft brush or cloth, to remove any loose dirt from the rollers.

Combine a small amount of soap with water to create a cleaning solution.

Soak a new rag in filtered water, squeeze it and use it to wipe the rollers thoroughly and remove any hard stains.

When finished wipe the rollers with a wet cloth to clean off any soap.

Allow the rollers to dry and then power the machine on again.

Maintain The Tension Control System The best defense against the drawbacks of wire breaks is prevention!

The tension control product on your double S nonwoven fabric machine is also crucial. This system helps maintain tension on the fabric straight and tight at the same time that it is being made. Appropriate tension control is very important to quality of nonwoven fabric.

To maintain the tension control system, perform these steps:

Test tension settings regularly, to ensure they are correct.

Check for wear or damage, such as frayed wires or loose elements.

Tighten the tension settings if you need to keep things running smoothly.

Clean tension control system frequently to remove dust.

BladesCleaning and Inspecting

The cutters on your double S nonwoven machine fabric are very crucial for fabric cutting. Over the years, the blades can become dulled or damaged, which can lead to ineffective cutting and raggedy-looking edges. Cleaning and inspection of the blades is necessary for quality fabric.

Here’s how to clean and inspect the cutting blades:

Turn off the machine and disconnect it.

Carefully remove the cutting blades the machine.

Gently brush away any dirt from the blades.

Inspect the blades for wear or damage, such as nicks or dull areas.

If you want to cut better, sharpen the blades or replace them.

How to Keep the Heating Elements Clean

The heater on your Double S Nonwoven Fabric Machines are vital when it comes to maintaining the proper temperature for the fabrication of the fabric. Unhygienic or dismantled heating elements might lead to non-uniform heating and production issues. Keeping them clean allows for smooth operation of the machine.

For the sake of keeping the heating elements of your oven clean, you should never:

Inspect the heating elements frequently for soiling.

Clean them gently with a soft brush or cloth.

​Avoid harsh chemicals, abrasive materials that can harm them.

If you notice any issues, such as uneven heating, consult a professional.

The Importance of Lubrication

Lubrication is the key factor for your double S nonwoven fabric machine working good. It smooths the action of parts, reduces wear, and extends an operating machine’s life. Periodically oiling those key parts will help keep the whole thing running smoothly.

Here's how you can grease your machine:

For the best lubricants and the frequency of lubrication, refer to the manufacturer’s instructions.

Lubricate the mechanical components such as bearings, shafts, and gears with a high-quality lubricant.

You don’t want to use excessive lubricant, as it will collect dirt.

Inspect lubricated parts for wear and lubrication and apply lubricants as required.

on a correctly following procedure for cleaning and maintaining your Double S Nonwoven Fabric Production, you can many sure that it will run well and last you a long time. And of course, always keep safety in mind when cleaning and maintaining your fabric-steaming appliance if you run into trouble, consult with a pro. AtYanpeng, we want to make sure that you get the most out of your nonwoven machines and ensure it continues to run for as long as you need it.