CSGO to Krunker Sensitivity: The Ultimate Conversion Guide
Introduction
If you're transitioning from CS:GO to Krunker, one of the most crucial adjustments you'll need to make is your mouse sensitivity. Since both games have different mechanics, engines, and FOV settings, converting your sensitivity accurately ensures a smooth transition and maintains your aiming consistency.
In this comprehensive guide, we'll cover:
Why sensitivity conversion matters
How to convert CS:GO sensitivity to Krunker
Best tools for sensitivity conversion
Tips for fine-tuning your sensitivity in Krunker
Common mistakes to avoid
By the end, you'll have the perfect sensitivity settings to dominate in Krunker just like you did in CS:GO.
Why Sensitivity Conversion Matters
Muscle Memory Consistency
Your muscle memory is trained based on the distance your mouse moves to turn a certain angle in-game. If your sensitivity is drastically different between CS:GO and Krunker, your aim will feel off, leading to poor performance.
Game Mechanics Differences
CS:GO uses the Source Engine with a default FOV of 90.
Krunker is a browser-based FPS with a default FOV of 103 (affected by different resolutions).
Different engine calculations mean raw sensitivity values don’t translate 1:1.
Competitive Advantage
A consistent sensitivity allows for better flick shots, tracking, and overall precision, giving you an edge in fast-paced matches.
How to Convert CS:GO Sensitivity to Krunker
Step 1: Find Your CS:GO Sensitivity
Before converting, note your CS:GO sensitivity and DPI. For example:
CS:GO Sensitivity: 2.0
DPI: 800
Step 2: Understand the Conversion Formula
Krunker sensitivity is based on a 360-degree turn distance, similar to CS:GO. The general formula is:
Krunker Sensitivity=CS:GO Sensitivity×CS:GO YawKrunker Yaw
CS:GO Yaw: 0.022 (default)
Krunker Yaw: 0.0066 (default)
So, the conversion becomes:
Krunker Sensitivity=CS:GO Sensitivity×0.0220.0066≈CS:GO Sensitivity×3.333
Example Conversion:
If your CS:GO sensitivity is 2.0, your Krunker sensitivity would be:
2.0×3.333≈6.666
Step 3: Adjust for FOV Differences
Since Krunker has a higher default FOV, you may need slight tweaks. A good rule of thumb:
If you play 4:3 stretched in CS:GO, stick with the exact conversion.
If you play native 16:9, reduce Krunker sensitivity by 5-10% for better control.
Step 4: Test and Fine-Tune
Enter a Krunker custom match and test your new sensitivity:
Can you comfortably track moving targets?
Are your flick shots accurate?
Adjust in small increments (0.1-0.5) until it feels right.
Best Tools for Sensitivity Conversion
1. Mouse-Sensitivity.com
A premium tool that calculates sensitivity across 100+ games, including CS:GO and Krunker.
Pros:
Highly accurate
Accounts for FOV and resolution
Supports different mouse DPIs
Cons:
Requires a subscription for full access
2. KovaaK’s Sensitivity Matcher
A free tool that helps match sensitivities between games by measuring 360-degree rotation distance.
How to Use:
Measure your 360-distance in CS:GO.
Adjust Krunker sensitivity until the 360-distance matches.
3. Online Sensitivity Calculators
Websites like jscalc.io offer free conversion formulas. While less precise, they provide a good starting point.
Tips for Optimizing Your Krunker Sensitivity
1. Use the Same DPI
Keeping your mouse DPI consistent between games ensures better muscle memory retention.
2. Disable Mouse Acceleration
Both CS:GO and Krunker perform best with raw input. Ensure:
Windows mouse acceleration is off.
In-game acceleration is disabled.
3. Experiment with Different Scopes
Krunker has different scope sensitivities. Adjust them separately if you snipe often.
4. Lower Sensitivity for Better Precision
Most pros use:
CS:GO: 1.0–3.0 @ 400–800 DPI
Krunker: 3.0–10.0 @ 400–800 DPI
If your aim feels shaky, lower your sensitivity.
Common Mistakes to Avoid
1. Copying Pro Settings Blindly
Pro players’ sensitivities may not suit your playstyle. Focus on comfort, not imitation.
2. Ignoring FOV Impact
Higher FOV makes sensitivity feel faster. Adjust accordingly.
3. Changing Sensitivity Too Often
Stick with a setting for at least a week before making changes.
4. Not Testing in Real Matches
Training maps help, but real-game scenarios (strafe jumps, flick shots) are the best test.
Also Checkout More Games : Krunker
Final Thoughts
Converting your CS:GO sensitivity to Krunker is essential for maintaining peak performance. By using the 3.333x multiplier, fine-tuning for FOV, and leveraging tools like mouse-sensitivity.com, you can achieve near-perfect sensitivity matching.
Remember:
✅ Keep DPI consistent
✅ Disable mouse acceleration
✅ Test in real matches
✅ Adjust scoped sensitivity separately
With these steps, you’ll transition smoothly and dominate in Krunker with the same precision as in CS:GO!
FAQ
Q: Can I use the exact same sensitivity in Krunker as in CS:GO?
A: No, due to different engine calculations, you need to multiply your CS:GO sensitivity by ~3.333.
Q: What’s the best DPI for Krunker?
A: Most players use 400–1600 DPI. Stick with what you used in CS:GO.
Q: Why does my aim feel faster in Krunker?
A: Krunker’s higher FOV makes sensitivity feel quicker. Try reducing it by 5-10%.
Q: Are there Krunker pros who use CS:GO sensitivity?
A: Many Krunker pros come from CS:GO, but they adjust their sensitivity using the 3.333x rule.
